Sign In | Join Free | My vivirlatino.com
vivirlatino.com
Shenzhen Optostar Optoelectronics Co., Ltd
Shenzhen Optostar Optoelectronics Co., Ltd Communication Everywhere!
Home > GPON ONU >

OP-C0401 GPONHGU ONU is one of the GPON optical network unit design to meet the requirement of the broadband access

Shenzhen Optostar Optoelectronics Co., Ltd
Trust Seal
Verified Supplier
Credit Check
Supplier Assessment

OP-C0401 GPONHGU ONU is one of the GPON optical network unit design to meet the requirement of the broadband access

Brand Name : OPTOSTAR
Model Number : OP-221WCATV
Place of Origin : China (mainland)
Payment Terms : T/T, Western Union
Delivery Time : 3-7 work days
MOQ : 1
Price : Negotiable
Supply Ability : 20000piece/per
Pon : Support 802.3ah ctc external oam etc.
ETHERNET : Support 802.1Q VLAN,QoS etc.
VOICE : Support VAD, CNG etc.
WLAN : Support WPS
CATV : 47~862MHz
EPON Port : SC/PC, Connected to OLT
POWER : Power switch
USB : USB 2.0 host port
Contact Now

High Performance EPON HGU FTTH Be Connected To OLT Via ODN Optical Distributed Net



General Description


EPON HGU (2FE + 1VOIP + WiFi + CATV) is a fiber to the home (FTTH) broadband access equipment type. It has good QoS guarantee high reliability, manageability, scalability and flexible networking features. It is also a high-end line with IEEE802.11b/g/n standard Multi-terminal products. It can be an individual user SOHO (small office or home office), small businesses provide high-performance access services.


FEATURE


OP-221WCATV be connected to OLT via ODN(Optical Distributed Net),Compose Gepon net which optical ratio is 1:32 or 1:64(Short Distence).


Feature of OP-221WCATV:


Pon:


Support 802.3ah ctc external oam

Support DBA algorithm

Support 128 bit triple churning algorithm

Support Dying gasp


ETHERNET:


Support 802.1Q VLAN,QoS

Support broadcast storm protection

Support bandwidth control

Support IGMP snooping/proxy

Support IPV4/6


VOICE:


Support G.711 a/u law,G.712 G.729a code/decode

Support VAD, CNG

Support G.711/T38 fax

Support SIP/H248/MGCP


WLAN:


Up to 300Mbps bandwidth

Compatible with 802.11b/g/n,

Compatible to equipment working on 2.4G Hz

Support up to 4 SSID

Support WPS


CATV:


47~862MHz

Ultra noise(3.8% modulation, CNR≥45dB@-10dBm)

High output level


Equipment Management:


Telnet

tr069

OAM

Web


OUTLINE

Ports Discrition(From Left to Rignt):

  • EPON Port:SC/PC,Connected to OLT .
  • CATV: F Connecter, CATV RF Output.
  • FXS1:RJ11 FXS Connecter, Connected to telephone or

fax. Supply Voice Service.

  • ETH1 ETH2:Connected to Local Area Network
  • WPS: Press WPS Button, start to negotiate for WPS.
  • WLAN: Switch to open or close WLAN Function.
  • RST Button:Press this button, and Hold 1 second,

Equipment be defaulted.

  • USB: USB 2.0 host port
  • DC 12V: Power input port.
  • POWER: Power switch.

LEDS Discription


  • LEDs Lighting Switch

Press this switch, to turn off LEDs when device is working.


  • LEDs Function:


Guide Ledscolordefinition
PWRgreenon:POWER ON
off: POWER OFF
PONgreenon:MPCP and OAM be Actived
flash:Registering
Off: MPCP and OAM not be Founded

LOS

(Loss of Optical Signal)

redflash:Optical Power be too Low
off:Optical Power be Normal

INT

(Internet)

greenon:In Router Mode, Internet is Connedted, No Data Transmission
flash:Data be Transmitting
Off: In Bridge Mode or No Internet Data
WLANgreenon:WLAN be Actived
flash:Data be Transmitting
off: System be Power off or WLAN be Forbidden
FXS1greenon:Registered Successfully to Server
flash: Data be Transmitting
off:Registered Unsuccessfully
CATVgreenon:CATV is enabled
off: CATV is disabled
ETH1 ETH2greenon: Linked
flash: Data be Transmitting
off: No Linked

WPS

(Wlan Pairs)

greenon: Linked successfully
flash: negotiating or negotiate unsuccessfully
off: Linked Unsuccessfully
USBgreenon: Linked and be In Master Mode
flash: Data be Transmitting
off: No Linked

Dimension,Weight


Dimension:189.72mm(L) x 137mm(W) x 48mm (H)

Weight:350g


EQUIPMENT INSTALLING


INSTALLING ENVIRONMENT


  • The device is a home equipment, please don’t use the same power outlet together with high power equipment such as refrigerator, haer dryer etc.
  • It should be waterproof, dampproof and lighting protecting when installing
  • In order to make sure a good circumstance of heat radiation,pls leave enough space for devices when installing

POWER REQUIREMENT


  • OP-221WCATV be power ed by external power adapter.
  • Input of Power Adapter: 100~240V AC 50/60Hz
  • output of Power Adapter:12V/1A Power
  • Consumption:< 6W

OPERATING ENVIRONMENT


  • Operating Temperature: - 5 ºC ~ 55 ºC
  • Storage Temperature:-40 ºC ~ 80 ºC
  • Relative Humidity:5% ~ 95%

CABLE CONNECTING


PON Port Connecting:


Open the cover plate, pick off the cover of the fiber and insert fiber into the fiber connector of the equipment,according to following figure.



After connecting, please coil up fiber as groove of bottom, according to following figure.



Warning :The fiber connecting port should keep clean


ETHERNET Ports Connecting:


Ports E1 iTV E3 E4 support auto MDI/MDIX function,should be individually connected to equipment on users side.


VOICE Port Connecting:


Connect RJ11 to telephone or fax.


TECHNICAL SPECIFICATION


PON PORT: Parameter as following table:


ParameterMinTypicalMaxUnit
Optical Transmitter
Wavelength127013101360nm
Power(average)-1+4dBm
Rate1.25Gbit/s
Optical Receiver
Wavelength148014901500nm
Sensitivity-25dBm
Overload-3
Rate1.25Gbit/s
CATV
Wavelength154015501560nm
ReceptacleSC/APC

ETHERNET PORT:


StandardIEEE 802.3
IEEE 802.3au
IEEE 802.3x
LAN10/100BASE-T
MDI/MDIX AUTONEGOTIATION
ConnectorRJ45

VOICE PORT:


Ring VoltageVrms>50V
Transmission Distence>1km
ConnectorRJ11

WLAN:


RateCompatible to IEEE802.11 b/g/n
Courtry CodeSelectable
Web Encryption64 128 152

CATV:


ParameterMinTypMaxdBm
Receiver Power-12-2dBm
RF Output(-2dBm)90dBuv
Flatness1.0dB
CNR1(-2dBm)56.6dB
CNR2(-8dBm)48.2dB

NETWORK MANAGEMENT

OP-221WCATV can be managed in locate, and can be managed by software EMS on OLT side at same time. Detail of installing and using about EMS, please reference to manual of EMS.


APPENDIX A SECURITY REMINDER

  • Please don’t pick off the cover of fiber adapter before connect the fiber
  • Don’t look at the fiber port with your bare eyes
  • Don’t open up the out shell of equipment in personal
  • Please make sure the operating voltage is suit for the equipment
  • Don’t bend the fiber, the semidiameter should be more than 38mm
  • Keep it waterproof, dampproof

APPENDIX B COMMON FAULT ANALYSIS


Pls settle the faults with following advice if you meet issues when you are installing equipments. Please contact with us if you need help


Regular faultsSolutions
PWR LED OFFPower Switch button be not pressed
LOS LED FLASHFiber of PON not connected
Receptacle not match
Fiber be broken or attenuation be too high
LED of PON LNK FLASH

ONU registration failure,check whether optical power exceed optical overload power or not,

Whether ONU MAC is included in block list of OLT or not

Packet Loss Rate HighInput optical power is too low, Radius of curvature is too short or end of fiber is not clean
Configuration is right or not
LED of E1-E2 OFFCable is damaged
Cable is too long

APPENDIX C APPLICATION



Figure 1 Network Topology


Product Tags:

gpon equipment

      

Gpon onu modem

      
China Customized Inflatable Bumper Ball Game Bubble Adult Grass CE supplier

OP-C0401 GPONHGU ONU is one of the GPON optical network unit design to meet the requirement of the broadband access Images

Inquiry Cart 0
Send your message to this supplier
 
From:
Enter your email please.
To: Shenzhen Optostar Optoelectronics Co., Ltd
Subject:
Message:
Characters Remaining: (0/3000)
 
Inquiry Cart 0